GRASS VALLEY EDIUS VERSION 5.1 - Section a - Hardware Settings; EDIUS SP;SP-SDI (SHX) Settings; System Settings

Appendix A
Hardware Settings
This appendix explains settings for various optional EDIUS hardware cap-
turing and editing boards and hardware that may be installed in the EDIUS
computer. Also covered are common video, audio and interface devices
installed in the computer.
EDIUS SP/SP-SDI (SHX) Settings
EDIUS SP hardware displays as “SHX-E1” in EDIUS settings screens and
the Windows Device Manager. EDIUS SP-SDI displays as “SHX-E2.” The
settings for both are identical with the only difference being the name.
SHX-E1 or SHX-E2 Settings are accessed by selecting Settings>Hardware
Settings from the Preview window and then selecting SHX-E1 or SHX-E2
Settings.
Note If the Hardware Settings tree is collapsed, click the “+” to expand the tree.
System Settings
To define System Settings for an SHX-E1 or SHX-E2 device, do the fol-
lowing:
1. If necessary, click the “+” to expand the SHX-E1/SHX-E2 Settings tree.
2. Select “System Settings” from the SHX-E1/SHX-E2 Settings tree. The
dialog in Figure 862 appears.