EDIUS — User Reference Guide 726
EDIUS NX/NX Express (NHX) Settings
Note 0 IRE is commonly used in Japan and 7.5 IRE is commonly used in North
America.
6. Select the desired NTSC Component level from the “Component
Level” drop-down list.
7. Select the “Enable Wide Screen Signal” if content is to be displayed on
televisions that support WSS with automatic aspect ratio (4:3 or 16:9)
switching.
8. Click the OK button to save the settings and close the General I/O
Settings dialog.
While in the System Settings dialog, clicking the Default* button returns all settings marked with an “*” to their default
values.
DV Device Settings
1.If necessary, click the “+” to expand the NHX-E1/NHX-E2 Settings tree.
2.Select “DV Device Settings” from the NHX-E1/NHX-E2 Settings tree. The
dialog in Figure 873 appears.
To Next Page
Loading...