GRASS VALLEY EDIUS VERSION 5.1 User Manual

EDIUS — User Reference Guide 467
Multi Cam Mode
Setting Camera Switch Point
A camera switch point is a trigger which causes a switch in the multi cam
camera display.
To set a camera switch point, do the following:
1. Position the Timeline cursor at the point at which you wish to set a
switch point.
2. Right-click the time scale and select “Add Cut Point/Clear Cut Point
(Toggle)” from the menu as shown in Figure 530.
Figure 530. Time Scale Menu - Add Cut Point/Clear Cut Point
A camera switch point is set at the cursor location and a cut point is added
to the clips on the switch point as illustrated in Figure 531

GRASS VALLEY EDIUS VERSION 5.1 Specifications

General

Brand	GRASS VALLEY
Model	EDIUS VERSION 5.1
Category	Software
Language	English