GRASS VALLEY EDIUS VERSION 5.1 User Manual

54 EDIUS — User Reference Guide
Section 1 — Getting Started
To create a new project from the current project, do the following:
1. Perform any of the three actions listed above to initiate the creation of a
new project.
After performing any of these actions, a dialog prompting to save the
current project file appears. See Figure 34.
Figure 34. Save Current Project Dialog
2. Click Yes to save the current project.
The Project settings (simple settings) dialog box shown in Figure 35
appears.
Figure 35. Project Settings (Simple Settings) Dialog
3. Enter a name for the project in the Project name field.
4. Select the desired project preset and click the OK button.
Note If you wish to create a new project preset, click the New Preset button and
follow the instructions to Create a Project Preset on page 45.

GRASS VALLEY EDIUS VERSION 5.1 Specifications

General

Brand	GRASS VALLEY
Model	EDIUS VERSION 5.1
Category	Software
Language	English