646 EDIUS — User Reference Guide
Section 7 — Audio Operations
Figure 790. Volume/Pan Right-Click Menu
4. Select the type of adjustment you wish to make.
• Move - Adjust the volume/pan or timecode of the selected point
• Move Two Aligning Points - Adjusts the selected point and the next
point on the rubber band to the same value.
• Add Points and Move - Adds two points at the location of the
selected point and the next point and adjusts them to the entered
value.
• Move All - Other points move vertically to maintain their relative
position to the entered value.
• Move All On Scale - Adjust the volume/pan of all points by the
same amount.
An entry dialog appears for either Volume or Pan depending on what is
selected. See Figure 791 and Figure 792.
Figure 791. Volume Entry Dialog
To Next Page
Loading...
Need help?
General