EDIUS — User Reference Guide 651
Normalize Audio
Based on the specified normalization level, EDIUS calculates the appro-
priate gain value for each clip for all channels. This calculated gain value is
displayed in the Clip Properties Audio Info tab as illustrated in Figure 798.
Figure 798. Audio Info - Normalized Clip
The calculated gain value can be changed by entering another value. When
the
Apply button is clicked to apply the change, the dialog shown in
Figure 799 appears.
Figure 799. Apply Gain Change Dialog
If the Yes button is clicked the gain values is applied to all channels in the
clip. If the
No button is clicked, the gain values is applies to only the channel
selected in the Channel Settings of the Clip Properties Audio Info tab.
To Next Page
Loading...