EDIUS — User Reference Guide 724
EDIUS NX/NX Express (NHX) Settings
2. Select “System Settings” from the NHX-E1/NHX-E2 Settings tree. The
dialog in Figure 871 appears.
Figure 871. NHX-E1/NHX-E2 System Settings Dialog
3. From the drop-down list, select the RT buffer frame size (stated as a
number of Megabytes). Choices are: 128 (default), 256, 384, 512.
Note EDIUS renders ahead using the Real-Time playback buffer from which frames
are then taken for playback. Memory reserved for the RT buffer is not avail-
able to other programs. If the RT buffer is too large, the system may run out
of physical memory which will degrade real-time playback performance.
Adjust the RT buffers with caution.
Note After changing the size of RT buffers, EDIUS must be restarted for the change
to take effect.
4. Click the OK button to save the settings and close the System Settings
dialog.
While in the System Settings dialog, clicking the Default* button returns all settings marked with an “*” to their default
values.
To Next Page
Loading...