EDIUS — User Reference Guide 737
HD STORM (HXQ-E1) Settings
Figure 879. HXQ-E1System Settings Dialog
3. From the drop-down list, select the RT buffer frame size (stated as a
number of Megabytes). Choices are: 128 (default), 256, 384, 512.
Note EDIUS renders ahead using the Real-Time playback buffer from which frames
are then taken for playback. Memory reserved for the RT buffer is not avail-
able to other programs. If the RT buffer is too large, the system may run out
of physical memory which will degrade real-time playback performance.
Adjust the RT buffers with caution.
Note After changing the size of RT buffers, EDIUS must be restarted for the change
to take effect.
4. For Analog Audio Monitoring, select the desired channels for
monitoring purposes. Choices are: Ch 1/2, Ch 3/4 and Ch 1+3/2+4.
5. For HDMI Input, select the “Disable FIR filter at RGB/YUV444 to
YUV422 conversion” option if applicable.
6. Click the OK button to save the settings and close the System Settings
dialog.
To Next Page
Loading...
Need help?
General