Lexmark X945e MFP 7510 series User Manual

Diagnostic information 2-17
7510
Go Back
Previous
Next
289.04
Paper jam
Sensor (booklet media exit)
late jam
The media is late reaching the sensor (booklet
media exit) within the specified time after the
booklet folding solenoid is turned on.
Refer to the Finisher Service Manual.
289.05
Paper jam
Sensor (booklet media exit)
lag jam
The media reached the sensor (booklet media exit)
but did not clear it within the specified time.
Refer to the Finisher Service Manual.
289.06
Paper jam
Sensor (booklet media exit)
static jam
Media remains on the sensor (booklet media exit).
Refer to the Finisher Service Manual.
290.00
Scanner jam
Switch (sheet through) static
jam
Media remains on the sensor (sheet through).
Go to “290.00 Switch (sheet through) static jam”
on page 2-66.
290.01
Scanner jam
Sensor (sheet through) late
jam
The media is late reaching the sensor (sheet
through) within the specified time after the ADF feed
drive motor assembly is turned on.
Go to “290.01 Sensor (sheet through) late jam”
on page 2-67.
290.02
Scanner jam
Sensor (ADF pre-registration)
late jam (side 1)
The media is late reaching the sensor (ADF pre-
registration) within the specified time after the ADF
feed drive motor assembly is turned on.
Go to “290.02 Sensor (ADF pre-registration) late
jam (side 1)” on page 2-69.
290.03
Scanner jam
Sensor (ADF pre-registration)
lag jam
The media reached the sensor (ADF pre-
registration) but did not clear it within the specified
time.
Go to “290.03 Sensor (ADF pre-registration) lag
jam” on page 2-70.
290.10
Scanner jam
Sensor (ADF pre-registration)
static jam
Media remains on the sensor (ADF pre-registration).
Go to “290.10 Sensor (ADF pre-registration)
static jam” on page 2-73.
290.11
Scanner jam
Sensor (ADF registration) late
jam (side 1)
The media is late reaching the sensor (ADF
registration) within the specified time after the ADF
feed drive motor assembly is turned on.
Go to “290.11 Sensor (ADF registration) late jam
(side 1)” on page 2-74.
290.12
Scanner jam
Sensor (ADF registration) late
jam (side 2)
The media is late reaching the sensor (ADF
registration) within the specified time after reaching
the sensor (ADF pre-registration).
Go to “290.12 Sensor (ADF registration) late jam
(side 2)” on page 2-75.
290.14
Scanner jam
Sensor (ADF inverter) late
jam (Inverting)
The media is late reaching the sensor (ADF
inverter) within the specified time after reaching the
sensor (ADF registration).
Go to “290.14 Sensor (ADF inverter) late jam
(Inverting)” on page 2-80.
290.15
Scanner jam
Sensor (ADF registration) lag
jam (inverting)
The media reached the sensor (registration) but did
not clear it within the specified time.
Go to “290.15 Sensor (ADF registration) lag jam
(inverting)” on page 2-82.
Error code or
message
Error contents Description/Action

Lexmark X945e MFP 7510 series Specifications

General

Brand	Lexmark
Model	X945e MFP 7510 series
Category	Printer
Language	English