Lexmark X945e MFP 7510 series User Manual

2-18 Service Manual
7510
Go Back
Previous
Next
290.20
Scanner jam
Sensor (ADF width APS1),
sensor (ADF width APS 2)
and the sensor (ADF width
APS 3) static jam
Media remain on the sensor (ADF width APS1),
sensor (ADF width APS 2) and the sensor (ADF
width APS 3).
Go to “290.20 Sensor (ADF width APS1), sensor
(ADF width APS 2) and sensor (ADF width APS
3) static jam” on page 2-85.
290.21
Scanner jam
Sensor (ADF width APS 1)
static jam
Media remains on the sensor (ADF width APS 1).
Go to “290.21 Sensor (ADF width APS 1) static
jam” on page 2-86.
290.22
Scanner jam
Sensor (ADF width APS 2)
static jam
Media remains on the sensor (ADF width APS 2).
Go to “290.22 Sensor (ADF width APS 2) static
jam” on page 2-87.
290.23
Scanner jam
Sensor (ADF width APS 3)
static jam
Media remains on the sensor (ADF width APS 3).
Go to “290.23 Sensor (ADF width APS 3) static
jam” on page 2-88.
291.00
Scanner jam
Sensor (ADF registration)
static jam
Media remains on the sensor (ADF registration).
Go to “291.00 Sensor (ADF registration) static
jam” on page 2-89.
291.01
Scanner jam
Sensor (ADF inverter) lag jam
(Inverting)
The media reached the sensor (ADF inverter) but
did not clear it within the specified time.
Go to “291.01 Sensor (ADF inverter) lag jam
(inverting)” on page 2-89.
291.02
Scanner jam
Sensor (ADF inverter) late
jam 2
The media is late reaching the sensor (ADF
inverter) within the specified time after the ADF
registration motor is turned on.
Go to “291.02 Sensor (ADF inverter) late jam 2”
on page 2-91.
291.03
Scanner jam
Sensor (ADF inverter) lag jam The media reached the sensor (ADF inverter) but
did not clear it within the specified time.
Go to “291.03 Sensor (ADF inverter) lag jam” on
page 2-93.
292.01
Scanner jam
ADF raised jam The ADF unit assembly was raised while the ADF
was operating.
Go to “292.01 ADF raised jam” on page 2-95.
292.02
Scanner jam
ADF left cover jam The ADF left cover was opened while the ADF was
operating.
Go to “292.02 ADF left cover jam” on page 2-95.
293.00
Scanner jam
Document missing jam The system did not detect a set document when it
was instructed to feed from the ADF.
Go to “293.00 Document missing jam” on
page 2-95.
294.00
Scanner jam
Sensor (ADF inverter) static
jam
Media remains on the sensor (ADF inverter).
Go to “294.00 Sensor (ADF inverter) static jam”
on page 2-96.
Error code or
message
Error contents Description/Action

Lexmark X945e MFP 7510 series Specifications

General

Brand	Lexmark
Model	X945e MFP 7510 series
Category	Printer
Language	English