NEC Business Solutions Ltd Xen Master & Xen Axis
1 - 14 Multiline Terminal Programming
A6-324000-642-02 - Release 6.0
May 2003
23 System Call Park Recall Time
Selection
1 min. 0.5 min., 1.0 min., 1.5 min., 2.0 min., 3.0
min.,
5.0 min., 8.0 min., 10.0 min.
24 Intercom Feature Access Code
Assignment
Refer to Intercom Feature Access Code Assignment on page 1-130.
25 Internal Paging Alert Tone Selection Tone YS Tone YS
Tone No
26 Delayed Ringing Timer Assignment
(ICM)
10 sec. 00~99
28 PS Out of Area Tone Selection BT BT (Busy), RBT (Ring Back)
30 PS Out of Area Timer Selection
(BSU only)
12 sec. 00~99 sec.
31 Call Pickup Group - Direct All Blank 0~9 groups. 30 Tel per group max.
LK 1 System Mode
LK 2 ICM (Continued)
Data
No.
Memory Block Name Default Value Programming Values
LK 1 System Mode
LK 3 SLT
Data
No.
Memory Block Name Default Value Programming Values
01 Bounce Protect Time Selection 300 ms. Page 1:0 ms., 100 ms., 200 ms.,
300 ms., 400 ms., 500 ms.,
600 ms., 700 ms.
Page 2:800 ms. 900 ms., 1000 ms.,
1100 ms., 1200 ms., 1300 ms.,
1400 ms., 1500 ms.
02 SLT Hookflash Signal Selection Hold Hold
Flash
03 First Digit PBR Release Timer
Selection
10 sec. 10 sec., 20 sec., 30 sec., 40 sec., 50 sec.,
60 sec.
04 Dial 1 (DP) Hookflash Selection Yes Yes, No
05 Hookflash Start Time Selection 40 ms. 40 ms., 90 ms., 140 ms., 190 ms
240 ms., 290 ms., 340 ms.,
390 ms., 440 ms., 490 ms.
540 ms., 590 ms., 640 ms.,
690 ms., 740 ms., 790 ms.
06 Hookflash End Time Selection HST + 100 ms. Refer to Hookflash End Time Selection on
page 1-142.
07 Voice Mail Digit Add Assignment All Blank 0~9, *, # (up to 4 digits)
To Next Page
Loading...
Need help?
General
