May 2003
Programming Manual 1 - 15
A6-324000-642-02 - Release 6.0
May 2003
08 Voice Mail DTMF Delay Timer
Selection
1 sec. 0 sec., 1 sec., 2 sec., 3 sec., 4 sec.,
5 sec., 6 sec., 8 sec.
09 Voice Mail Disconnect Time Selection 1.5 sec. 0.5 sec., 1 sec., 1.5 sec., 2 sec.,
3 sec., 3.5 sec.
10 Voice Mail DTMF Duration/Interdigit
Time Selection
110/80 ms. 60/70 ms., 110/80 ms., 410/100 ms.,
610/100 ms., 810/190 ms.
LK 1 System Mode
LK 3 SLT (Continued)
Data
No.
Memory Block Name Default Value Programming Values
LK 1 System Mode
LK 4 Transfer/Automated Attendant (A.A.)
Data
No.
Memory Block Name Default Value Programming Values
00 Tandem Transfer Automatic Disconnect
Timer Selection
1 hr. 30 min., 1 hr., 2 hr., 3 hr.
01 Automated Attendant First Digit PBR
Release Timer Selection
10 sec. 5 sec., 10 sec., 20 sec., 30 sec., 40 sec.,
50 sec., 60 sec.
02 Automated Attendant Transfer/DID
Line - Delayed Ringing Time Selection
No Limit 10 sec., 20 sec., 30 sec., No Limit
03 Automated Attendant No Answer
Disconnect Time Selection
2 min. 1 min., 2 min., 3 min., 4 min.
04 Tandem Transfer SMDR Print
Extension Assignment
Tel No. 999 2-digit = 00 ~99
3-digit = 000 ~999
4-digit = 0000 ~9999
05 Automatic Tandem Trunk by Night
Mode Selection
No Yes, No
08 Automated Attendant PBR Timeout
Response Selection
Normal Call Normal Call, Release
09 Automated Attendant PBR Start
Time Selection
FR FR = Same Time as Greeting
AF = After Greeting
11 Automated Attendant Message Day/
Night Mode Selection
No Yes, No
12 Automated Attendant Message to
Tenant Assignment
All Automated
Attendant Messages:
Tenant Number 00
LK01~08 Assigned to CO/PBX Lines 01~08
13 Automated Attendant Answer Delay
Time Assignment
4 sec. 00~99 sec., per MSG 1~8
14 Automated Attendant Message Access
Code (1-Digit) Assignment
Refer to Automated Attendant Message Access Code (1-Digit)
Assignment on page 1-159.
To Next Page
Loading...
Need help?
General
