vii
Date Code 20170927 Instruction Manual SEL-751 Relay
List of Tables
Table 4.81 Setting Change Disable Setting.......................................................................................... 4.187
Table 4.82 Time Synchronization Source Setting................................................................................ 4.188
Table 4.83 Front-Panel Serial Port Settings ......................................................................................... 4.188
Table 4.84 Ethernet Port Settings......................................................................................................... 4.189
Table 4.85 Port Number Settings That Must be Unique...................................................................... 4.190
Table 4.86 Fiber-Optic Serial Port Settings ......................................................................................... 4.191
Table 4.87 Rear-Panel Serial Port (EIA-232) Settings......................................................................... 4.191
Table 4.88 Rear-Panel Serial Port (EIA-232/EIA-485) Settings.......................................................... 4.192
Table 4.89 Rear-Panel DeviceNet Port Settings................................................................................... 4.193
Table 4.90 Display Point and Local Bit Default Settings .................................................................... 4.194
Table 4.91 LCD Display Settings......................................................................................................... 4.194
Table 4.92 Settings That Always, Never, or Conditionally Hide a Display Point ............................... 4.196
Table 4.93 Entries for the Four Strings ................................................................................................ 4.196
Table 4.94 Binary Entry in the Name String Only............................................................................... 4.198
Table 4.95 Analog Entry in the Name String Only.............................................................................. 4.199
Table 4.97 Example Settings and Displays..........................................................................................4.200
Table 4.96 Entry in the Name String and the Alias Strings ................................................................. 4.200
Table 4.98 Target LED Settings ........................................................................................................... 4.203
Table 4.99 Pushbutton LED Settings ................................................................................................... 4.204
Table 4.100 Auto-Removal Settings ...................................................................................................... 4.206
Table 4.101 SER Trigger Settings.......................................................................................................... 4.206
Table 4.102 Enable Alias Settings ......................................................................................................... 4.206
Table 4.103 SET R SER Alias Settings ................................................................................................. 4.207
Table 4.104 Event Report Settings......................................................................................................... 4.207
Table 4.105 HIF Event Report Settings ................................................................................................. 4.208
Table 4.106 Load Profile Settings.......................................................................................................... 4.208
Table 4.107 DNP Map Settings.............................................................................................................. 4.208
Table 4.108 User Map Register Settings ............................................................................................... 4.209
Table 5.1 Measured Fundamental Meter Values.................................................................................... 5.3
Table 5.2 Thermal Meter Values ............................................................................................................ 5.5
Table 5.3 RTD Input Status Messages ................................................................................................... 5.6
Table 5.4 Maximum/Minimum Meter Values........................................................................................ 5.7
Table 5.5 RMS Meter Values ................................................................................................................. 5.9
Table 5.6 Demand Values..................................................................................................................... 5.11
Table 5.7 Synchrophasor Measured Values ......................................................................................... 5.12
Table 5.8 High-Impedance Fault Metering Measured Values.............................................................. 5.13
Table 5.9 Station DC Battery Monitor Settings ................................................................................... 5.15
Table 5.10 Breaker Maintenance Information for a 25 kV Circuit Breaker .......................................... 5.19
Table 5.11 Breaker Monitor Settings ..................................................................................................... 5.20
Table 6.1 Methods of Accessing Settings .............................................................................................. 6.1
Table 6.2 SHOW Command Options..................................................................................................... 6.4
Table 6.3 SET Command Options ......................................................................................................... 6.4
Table 6.4 SET Command Editing Keystrokes........................................................................................ 6.5
Table 6.5 SET Command Format........................................................................................................... 6.6
Table SET.1 Range Dependencies for the EDIR Setting .......................................................................SET.6
Table SET.2 Range Dependencies for the ORDER Setting ...................................................................SET.6
Table SET.3 Range Dependencies for 27I Operating Quantities.........................................................SET.13
Table SET.4 Range Dependencies for 59I Operating Quantities.........................................................SET.14
Table SET.5 Port Number Settings That Must be Unique ................................................................... SET.51
Table 7.1 SEL-751 Communications Port Interfaces............................................................................. 7.1
Table 7.2 PRP Settings........................................................................................................................... 7.6
Table 7.3 EIA-232/EIA-485 Serial Port Pin Functions......................................................................... 7.8
Table 7.4 Protocols Supported on the Various Ports ............................................................................ 7.11
Table 7.5 Settings Associated With SNTP...........................................................................................7.15
Table 7.6 Serial Port Automatic Messages ..........................................................................................7.17
Table 7.7 Command Response Header Definitions ............................................................................. 7.19
Table 7.8 Access Commands ............................................................................................................... 7.20
To Next Page
Loading...
