associated role. If the corresponding group is known on the device, both tables are evaluated.
The user is assigned the role with the higher rights.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
user-account-ext <user-name-ext> role <user-role-ext> [description
<user-ext-description>]
The parameters have the following meaning:
Parameter Description Range of values / note
user-account-
ext
Keyword for a user in the table "Ex‐
ternal User Accounts"
-
user-name-ext User name Enter the name for the user. The name
must meet the following conditions:
● It must be unique.
● It must be between 1 and 250
characters long.
role Keyword for the role name -
user-role-ext Role name Enter a role.
You can choose between system-defined
and self-defined roles.
description Keyword for the description -
user-ext-
description
Content of the description Enter a description for the user in the table
"External User Accounts". The description
text can be up to 100 characters long.
Result
A link in the table "External User Accounts" has been created.
Note
User name cannot be changed
After creating a user, the user name can no longer be modified. If a user name needs to be
changed, the user must be deleted and a new user created.
Further notes
You delete a link with the no user-account-ext command.
Security and authentication
11.1 User rights management
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
482 Configuration Manual, 09/2017, C79000-G8976-C324-08
To Next Page
Loading...
Need help?
General
