Xerox PHASER 7500 - Page 221

Phaser 7500 Printer Service Manual 3-83
Error Messages and Codes
4 Check the wiring for continuity or
grounded condition P/J4173, P/
J5112, P/J525.
Is the wiring correct?
Replace the
following parts
in sequence:
■ Full Stack
Sensor
(PL17.19)
■ Motor Drive
PWB (REP
18.13,
page 8-204)
Replace the
Wire Harness
Full Stack
Sensor P/
J5112 <=> P/
J525 or Wire
Harness (Main
LH).
Troubleshooting Procedure (Continued)
Step Actions and Questions Yes No