Alcatel-Lucent OmniAccess 5740 - Page 1027

QoS Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
1001
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Refer ‘Appendix - QoS Values and Mnemonics’ for IP-precedence and IP-dscp
default values.
E
XAMPLE
ALU(config-qos-P1-C1)#random-detect ip-precedence
ALU(config-qos-P1-C1)# random-detect ip-dscp 5 min-thresh 60
max-thresh max-thresh 600
ALU(config-qos-P1-C1)# no random-detect
ALU(config-qos-P1-C1)# no random-detect ip-precedence
ALU(config-qos-P1-C1)# no random-detect values
random-detect ip-precedence
<0-7> min-thresh <50-750> max-
thresh <150-950>
Use this command to change the
default ip-precedence based WRED
values. This command populates the
WRED values but does not enable the
feature. To enable this, use ‘random-
detect ip-precedence’ command.
Note: The queue limit of the
traffic class should be
greater than the max thresh
value.
no random-detect [ip-dscp|ip-
dscp-values|ip-precedence|ip-
precedence-values|values]
This command resets disables the
random-detect on ip-dscp and ip-
precedence. The command also
deletes all ip-dscp, ip-precedence
configuration, or all random-detect
configuration.
Command (in Class Mode) Description