DHCP (Dynamic Host Configuration Protocol) Client
Left running head:
Chapter name (automatic)
1064
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
T
O SPECIFY THE REQUEST TYPE
EXAMPLE
ALU(config–dhcp-client-client1)# request-type address
ALU(config–dhcp-client-client1)# no request-type address
Command (in DHCP Client Object CM) Description
request-type {address|inform} This command is used to configure the
type of request the client should send to
the server.
Address: This option specifies that the
client should get the IP address and the
DHCP options from the DHCP server.
Inform: This option specifies that the
client should request the DHCP server to
send only the DHCP options and no IP
address assignment.
The default request type is 'address'.
no request-type
{address|inform}
This command is used to delete the
configured type of request, and sets it to
default.
To Next Page
Loading...
Need help?
General
