Alcatel-Lucent OmniAccess 5740 - Page 1091

DHCP Client Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
1065
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
TO REQUEST FOR A SPECIFIC DHCP OPTION FROM THE SERVER
EXAMPLE
ALU(config–dhcp-client-client1)# parameter-req-list bootfile-
name
ALU(config–dhcp-client-client1)# no parameter-req-list
bootfile-name
Command (in DHCP Client Object CM) Description
parameter-req-list {bootfile-
name|classless-static-routes
|lease-time|ntp-server
|rebinding-time|renewal-time
|routers|server-identifier
|sip-server|subnet-mask|tftp-
server-addr|tftp-server-name
|vendor-specific}
This command is used to create a DHCP
parameter request list option. You can
configure request for multiple DHCP
options in the list.
no parameter-req-list
{bootfile-name|classless-
static-routes|lease-time|ntp-
server|rebinding-time|renewal-
time|routers|server-identifier
|sip-server|subnet-mask|tftp-
server-addr|tftp-server-name
|vendor-specific}
This command is used to delete a DHCP
parameter request list option from the
client object.