Alcatel-Lucent OmniAccess 5740 - Page 304

T1E1 Line Card
Left running head:
Chapter name (automatic)
278
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
To configure multiple channel groups, with absolute values of timeslots:
ALU(config-controller T1)#channel-group 0 timeslots 1
ALU(config-controller T1)#channel-group 1 timeslots 2
To configure multiple channel groups, with contiguous values of timeslots:
ALU(config-controller T1)#channel-group 3 timeslots 10-13
To configure multiple channel groups, with non-contiguous values of timeslots:
ALU(config-controller T1)#channel-group 2 timeslots 3,6,9
Note: Timeslots cannot overlap, hence one timeslot cannot be part of more than one
channel-group
T
O BRING UP/SHUTDOWN THE T1 CONTROLLER
EXAMPLE
ALU(config-controller T1)# no shutdown
ALU(config-controller T1)# shutdown
Note: We support Online Insertion and Removal (OIR) functionality for T1E1 line card.
Command (in CCM) Description
no shutdown This command is entered in the
controller configuration mode on the T1
controller. The keyword “no shutdown”
will administratively bring up the
controller.
shutdown This command is entered in the
controller configuration mode on the T1
controller. The keyword “shutdown” will
administratively bring down the
controller.