Frame Relay
Left running head:
Chapter name (automatic)
326
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
F
RAME RELAY SHOW COMMANDS
The following commands are used to view the FR configuration details:
T
O VIEW FRAME RELAY PVC
E
XAMPLE
ALU(config-if Serial0/0:0)# show frame-relay pvc interface
Serial 0/0:0
PVC Statistics for interface Serial0/0:0 (Frame Relay DTE)
DLCI = 200, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE =
Serial0/0:0
input pkts 0 output pkts 0
in bytes 0 out bytes 0
in pkts dropped 0 out pkts dropped 0
in FECN pkts 0 out FECN pkts 0
in BECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 0 out bcast bytes 0
Command (in SUM/CM/ICM) Description
show frame-relay pvc [{<16-1022>
|interface <Serial> <slot/
port:channel>]
This command displays the status of
the Frame Relay Permanent Virtual
Circuit (PVC).
To Next Page
Loading...
