Alcatel-Lucent OmniAccess 5740 Cli Configuration Guide

Frame Relay Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
327
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
TO VIEW FR LMI DETAILS
EXAMPLE
The following example displays the FR LMI configuration details and parameters
for all the interfaces:
ALU(config-if Serial0/0:0)# show frame-relay lmi
LMI Statistics for interface Serial0/0:0 (Frame Relay DTE)
LMI TYPE = AUTOSENSE
Invalid Unnumbered info 0 Invalid Prot Disc 0
Invalid dummy Call Ref 0 Invalid Msg Type 0
Invalid Status Message 0 Invalid Lock Shift 0
Invalid Information ID 0 Invalid Report IE Len 0
Invalid Report Request 0 Invalid Keep IE Len 0
Num Status Enq. Sent 0 Num Status msgs Rcvd 0
Num Update Status Rcvd 0 Num Status Timeouts 0
The following example displays the FR LMI configuration details and parameters
for a specific interface:
ALU(config-if Serial0/0:0)# show frame-relay lmi interface
Serial 0/0:0
LMI Statistics for interface Serial0/0:0 (Frame Relay DTE)
LMI TYPE = AUTOSENSE
Invalid Unnumbered info 0 Invalid Prot Disc 0
Invalid dummy Call Ref 0 Invalid Msg Type 0
Invalid Status Message 0 Invalid Lock Shift 0
Invalid Information ID 0 Invalid Report IE Len 0
Invalid Report Request 0 Invalid Keep IE Len 0
Num Status Enq. Sent 0 Num Status msgs Rcvd 0
Num Update Status Rcvd 0 Num Status Timeouts 0
Command (in SUM/CM/ICM) Description
show frame-relay lmi
[interface <Serial> <slot/
port:channel>]
This command displays the FR LMI
configuration details and parameters.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English