Ethernet OAM (Operations, Administration, and Maintenance)
Left running head:
Chapter name (automatic)
406
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
T
O CONFIGURE CCM INTERVAL
EXAMPLE
ALU(config-oam-domain-assoc)# ccm-interval 1m
ALU(config-oam-domain-assoc)# no ccm-interval
Command (in OAM-DA CM) Description
ccm-interval {10m|10s|1m|1s} This command is entered in the Domain
Association Configuration Mode.
This command is used to configure the
time interval between two CCMs for a
maintenance association.
This interval will be applied to all the
MEPs within a MA.
no ccm-interval
[10m|10s|1m|1s]
This command is used to delete the
configured CCM interval and reset it to
the default value.
The default CCM interval is 1 second.
To Next Page
Loading...
