Table 69 HEX TYPE CRIMP TOOLS FOR LARGE MS20659 TERMINAL LUGS (Continued)
Crimp Barrel
Size
Crimp Tool
Basic Unit Head Adapter
Die Set
Primary Secondary
4 Power Pump
13642 TBM12D-AR ST2354-2 11734
13642M TBM12D-AR ST2354-2 11734
BDHD1 - ST2354B-2 -
TBHD1 - ST2354-2 11734
TBM12 TBM12D-AR ST2354-2 11734
Y29B - ST2354B-2 -
2 Power Pump
13642 TBM12D-AR ST2354-1 -
13642M TBM12D-AR ST2354-1 -
BDHD1 - ST2354B-1 -
TBHD1 - ST2354-1 -
TBM12 TBM12D-AR ST2354-1 -
Y29B - ST2354B-1 -
1/0 Power Pump
13642 TBM12D-AR 11738 11737
13642M TBM12D-AR 11738 11737
TBHD1 - 11738 11737
TBM12 TBM12D-AR 11738 11737
2/0 Power Pump
13642 TBM12D-AR 11739 -
13642M TBM12D-AR 11739 -
TBHD1 - 11739 -
TBM12 TBM12D-AR 11739 -
3/0 Power Pump
13642 TBM12D-AR ST2354-16 ST2354-3
13642M TBM12D-AR ST2354-16 ST2354-3
BDHD1 - ST2354B-3 -
TBHD1 - ST2354-16 ST2354-3
TBM12 TBM12D-AR ST2354-16 ST2354-3
Y29B - ST2354B-3 -
NOTE: Refer to Table 40 for the part numbers of the recommended Power Pumps.
NOTE: Refer to Subject 20-30-22 for the assembly of a terminal lug with a conductor that is smaller
than the crimp barrel size of the terminal lug.
(1) Make a selection of a terminal lug from Table 23.
NOTE: For the selection of the terminal, use:
• The crimp barrel size, if one wire is to be terminated
ASSEMBLY OF INSULATED AND UNINSULATED TERMINAL LUGS
707, 727-787
STANDARD WIRING PRACTICES MANUAL
20-30-11
Page 102
Oct 15/2017D6-54446
ECCN 9E991 BOEING PROPRIETARY - See title page for details
To Next Page
Loading...
