108 Address Table Commands
show bridge address-table count
The show bridge address-table count Privileged EXEC mode command displays the number of addresses
present in all VLANs or in a specific VLAN.
Syntax
•
show bridge address-table count
[
vlan
vlan
] [
ethernet
interface-number
|
port-channel
port-channel-
number
]
Parameters
•
vlan
— Specifies a valid VLAN, such as VLAN 1.
•
interface —
A valid Ethernet port
.
•
port-channel-number
— A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
• This command displays the count for 1 VLAN, for all VLANs or for a specific port.
• No commas are allowed.
Example
In this example, the number of addresses present in the VLANs are displayed.
Console# show bridge address-table count
Free: 8084
Used: 108
Secure:8192
Dynamic addresses:
97
Static addresses: 2
Internal addresses: 9
5400_CLI.book Page 108 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
