Command Groups 51
Spanning Tree Commands
show snmp views Displays the configuration of views. Privileged EXEC
show snmp groups Displays the configuration of groups. Privileged EXEC
show snmp filters Displays the configuration of filters Privileged EXEC
show snmp users Displays the configuration of groups. Privileged EXEC
Command Group Description Access Mode
spanning-tree Enables spanning tree functionality. Global
Configuration
spanning-tree mode Configures the spanning tree protocol. Global
Configuration
spanning-tree forward-time Configures the spanning tree bridge forward time. Global
Configuration
spanning-tree hello-time Configures the spanning tree bridge Hello Time. Global
Configuration
spanning-tree max-age Configures the spanning tree bridge maximum age. Global
Configuration
spanning-tree priority Configures the spanning tree priority. Global
Configuration
spanning-tree disable Disables spanning tree on a specific port. Interface
Configuration
spanning-tree cost Configures the spanning tree path cost for a port. Interface
Configuration
spanning-tree port-priority Configures port priority. Interface
Configuration
spanning-tree portfast Enables PortFast mode. Interface
Configuration
spanning-tree link-type Overrides the default link-type setting. Interface
Configuration
(Ethernet, port-
channel)
spanning-tree mst priority Configures the device priority for the specified spanning-
tree instance
Global
Configuration
spanning-tree mst max-
hops
Configures the number of hops in an MST region before
the BDPU is discarded and the port information is aged
out.
Global
Configuration
5400_CLI.book Page 51 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
Need help?
General
