Dell PowerConnect 5424 - Show Interfaces Description

Ethernet Configuration Commands 167
show interfaces description
The show interfaces description User EXEC mode command displays the description for all configured
interfaces.
Syntax
show interfaces description [ethernet interface | port-channel port-channel-number ]
• interface — Valid Ethernet port.
• port-channel-number — A valid port-channel trunk index.
Default Configuration
This command has no default configuration.
Command Modes
Privilege EXEC mode
User Guidelines
• There are no user guidelines for this command.
Type: 1G-Copper
Link state: Up
Auto Negotiation: enabled
1000f 1000h 100f 100h 10f 10h
Admin Local Link
Advertisement
yes no yes yes yes yes
Oper Local Link
Advertisement
yes no yes yes yes yes
Remote Link
Advertisement
N/A N/A N/A N/A N/A N/A
Priority Resolution -- - - - - yes
Link State: Up
Auto Negotiation: disabled.
5400_CLI.book Page 167 Wednesday, December 17, 2008 4:33 PM