LLDP Commands 263
Example
The following example displays the Link Layer Discovery Protocol (LLDP) configuration.
show lldp local
The show lldp local Privileged EXEC mode command displays the Link Layer Discovery Protocol
(LLDP) information advertised from a specific port.
Syntax
•
show lldp local ethernet
interface
•
interface
— Ethernet interface
Command Modes
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Console# show lldp configuration
LLDP state: Enabled
Timer: 30 Seconds
Hold multiplier: 4
Reinit delay: 2 Seconds
Tx delay: 2 Seconds
Port State Optional TLVs Addres
---- ----- ------------- -------
g1 Rx and Tx
g2 Rx and Tx
g3 Rx and Tx
5400_CLI.book Page 263 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
