Command Groups 57
User Interface Commands
VLAN Commands
Command Group Description Access Mode
enable Enters the privileged EXEC mode. All
disable Returns to User EXEC mode. All
login Changes a login username. All
configure
Enables the Global Configuration mode
All
exit(configuration) Exits any configuration mode to the next highest mode in the
CLI mode hierarchy.
All
exit(EXEC) Closes an active terminal session by logging off the device. All
end Ends the current configuration session and returns to the
previous command mode.
All
help Displays a brief description of the help system. All
history Enables the command history function. All
terminal datadump Enables dumping of all the output from the show command
without ’prompting’.
Privileged
EXEC
history size Changes the command history buffer size for a particular line. All
debug-mode
Switches the mode to debug
.All
show history Lists the commands entered in the current session. All
show privilege Displays the current privilege level. All
do Executes a Global Configuration mode or any configuration
submode.
All
Command Group Description Access Mode
vlan database Enters the VLAN Database Configuration mode. Global
Configuration
vlan Creates a VLAN. VLAN
Configuration
interface vlan
Enters the Interface Configuration (VLAN) mode.
Global
Configuration
interface range vlan Enters the Interface Configuration mode to configure
multiple VLANs.
Global
Configuration
name Configures a name to a VLAN. Interface
Configuration
5400_CLI.book Page 57 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
Need help?
General
