250 Line Commands
show line
The show line User EXEC mode command displays line parameters.
Syntax
• show line [console | telnet | ssh]
•
console
— Console terminal line.
•
telnet
— Virtual terminal for remote console access (Telnet).
•
ssh
— Virtual terminal for secured remote console access (SSH).
Default Configuration
Default value is console.
Command Mode
User EXEC mode.
User Guidelines
• There are no user guidelines for this command.
Examples
The following example displays the Line Configuration.
terminal history
The terminal history EXEC mode command enables the command history function for the current
terminal session. Use the no form of this command to disable the command history function.
Syntax
• terminal history
• no terminal history
Default Configuration
This command has no default configuration.
Console (config)# line console
Console(config-line)# exec-timeout 20
5400_CLI.book Page 250 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
