284 Port Channel Commands
show interfaces port-channel
The show interfaces port-channel Privileged EXEC mode command shows Port channel information.
Syntax
•
show interfaces port-channel
[port-channel-number]
•
port_channel_number
— Number of the Port channel to display. (Range: Valid port channel)
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example shows how all port channel information is displayed.
Console# show interfaces port-channel
Load balancing: Layer2 and Layer 3.
Channel Ports
---------- -------
1 Active: 1, 2
2 Active: 2, 7
3 Active: 3, 8
5400_CLI.book Page 284 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
