EasyManua.ls Logo

Dell PowerConnect 5424 - Lldp Med Enable; Lldp Med Network-Policy (Global)

Dell PowerConnect 5424
512 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LLDP Commands 259
lldp med enable
The lldp med enable Interface Configuration mode command enables Link Layer Discovery Protocol
(LLDP) Media Endpoint Discovery (MED) on an interface. Use the no form of this command to disable
LLDP MED on an interface.
Syntax
lldp med enable
[
tlv1
tlv3
]
no lldp med enable
tlv
— Specifies TLV that should be included. Available TLVs are: network-policy and location. The
capabilities TLV is always included if LLDP–MED is enabled.
Default Configuration
LLDP is disabled.
Command Modes
Interface Configuration (Ethernet) mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example enables Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery
(MED) on an interface as network-policy.
lldp med network-policy (global)
The lldp med network-policy Global Configuration mode command defines LLDP MED network
policy. Use the no form of this command to remove LLDP MED network policy.
Console(config)# interface ethernet g5
Console(config-if)# lldp med enable network-policy
5400_CLI.book Page 259 Wednesday, December 17, 2008 4:33 PM

Table of Contents

Other manuals for Dell PowerConnect 5424

Related product manuals