Dell PowerConnect 5424 Command Line Interface Guide

466 VLAN Commands
Example
The following example displays all VLAN information.
show vlan protocols-groups
The show vlan protocols-groups Privileged EXEC mode command displays protocols-groups
information.
Syntax
• show vlan protocols-groups
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
• There are no user guidelines for this command.
Console# show vlan internal usage
Usage VLAN Reserved IP Address
--------- --------- ---------- ----------
g21 1007 No Active
g22 1008 Yes Inactive
g23 1009 Yes Active
5400_CLI.book Page 466 Wednesday, December 17, 2008 4:33 PM

Dell PowerConnect 5424 Specifications

General

Ports	24 x 10/100/1000Base-T
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
VLAN Support	Yes
Rack Mountable	Yes
Power Supply	Internal
MAC Address Table Size	8K entries
RAM	128 MB
Flash Memory	16 MB
Voltage Required	100-240V AC
Management	Web, CLI, SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% (non-condensing)
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Remote Management Protocol	SNMP, RMON, Telnet
Features	QoS, VLAN, Link Aggregation