QoS Commands 289
QoS Commands
qos
The qos Global Configuration mode command enables quality of service (QoS) on the device and
enters QoS basic mode. Use the no form of this command to disable the QoS features on the device.
Syntax
•qos
• no qos
Default Configuration
There is no default configuration for this command.
Command Mode
Global Configuration mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example shows how QoS is enabled on the device, in basic mode.
show qos
The show qos User EXEC mode command displays the quality of service (QoS) mode for the entire
device.
Syntax
•show qos
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Console(config)# qos
5400_CLI.book Page 289 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
