Dell PowerConnect 5424 - Show Management Access-Class

274 Management ACL
User Guidelines
• There are no user guidelines for this command.
Example
The following example displays the active management Access-List.
show management access-class
The show management access-class Privileged EXEC mode command displays the active management
Access-List.
Syntax
• show management access-class
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example displays the management Access-List information.
Console# show management access-list
mlist
-----
permit ethernet g1
permit ethernet g9
! (Note: all other access implicitly denied)
Console# show management access-class
Management access-class is enabled, using access list mlist
5400_CLI.book Page 274 Wednesday, December 17, 2008 4:33 PM