410 System Management
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example specifies the device host name.
service cpu-utilization
The service cpu-utilization Global Configuration mode command allows the software to measure CPU
utilization. Use the no form of this command to disable measuring.
Syntax
• service cpu-utilization
• no service cpu-utilization
Default Configuration
The service cpu-utilization function is enabled.
Command Mode
Global Configuration mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example allows the software to measure CPU utilization.
Console (config)# hostname Dell
console(config)# service cpu-utilization
5400_CLI.book Page 410 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
