Clock 133
Examples
The following example enables the device to use the Simple Network Time Protocol (SNTP) to request
and accept Network Time Protocol (NTP) traffic from servers.
sntp unicast client poll
The sntp unicast client poll Global Configuration mode command enables polling for the Simple
Network Time Protocol (SNTP) predefined Unicast clients. Use the no form of this command to disable
the polling for SNTP client.
Syntax
• sntp unicast client poll
• no sntp unicast client poll
This command has no arguments or keywords.
Default Configuration
Disabled.
Command Mode
Global Configuration mode.
User Guidelines
• Polling time is determined by the
sntp client poll timer
Global Configuration mode command.
Examples
The following example enables polling for the Simple Network Time Protocol (SNTP) predefined
Unicast clients.
sntp server
The sntp server Global Configuration mode command configures the device to use the Simple Network
Time Protocol (SNTP) to request and accept Network Time Protocol (NTP) traffic from a specified
server. Use the no form of this command to remove a server from the list of SNTP servers.
Console (config)# sntp unicast client enable
Console (config)# sntp unicast client poll
5400_CLI.book Page 133 Wednesday, December 17, 2008 4:33 PM