System Management 409
User Guidelines
• There are no user guidelines for this command.
Examples
The following command switches to another open Telnet session.
reload
The reload Privileged EXEC mode command reloads the operating system.
Syntax
• reload
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
• Caution should be exercised when resetting the device, to ensure that no other activity is being
performed. In particular, the user should verify that no configuration files are being downloaded at the
time of reset.
Example
The following example reloads the operating system.
hostname
The hostname Global Configuration mode command specifies or modifies the device host name. Use
the no form of the command to remove the existing host name.
Syntax
•
hostname
name
• no hostname
•
name
— The device host name. Range (1-158 characters)
Console> resume 176.213.10.50
Console# reload
5400_CLI.book Page 409 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
