290 QoS Commands
Command Mode
User EXEC mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example displays a QoS mode.
wrr-queue cos-map
The wrr-queue cos-map Global Configuration mode command maps assigned CoS values to select one
of the egress queues. Use the no form of this command to return to the default values.
Syntax
•
wrr-queue cos-map
queue-id cos1...cos8
•
no wrr-queue cos-map
[
queue-id
]
•
queue-id
— The queue number to which the following CoS values are mapped.
•
cos1...cos8
— Map to specific queues up to eight CoS values from 0 to 7.
Default Configuration
The map default values for 8 queues:
• Cos0 is mapped to queue 3
• Cos1 is mapped to queue 1
• Cos2 is mapped to queue 2
• Cos3 is mapped to queue 4
• Cos4 is mapped to queue 5
• Cos5 is mapped to queue 6
• Cos6 is mapped to queue 7
• Cos7 is mapped to queue 8
Command Mode
Global Configuration mode.
Console#show qos
Qos: disabled
Trust: dscp
5400_CLI.book Page 290 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
