192 GVRP Commands
User Guidelines
• There are no user guidelines for this command.
Example
The following example shows how to display GVRP configuration information:
show gvrp statistics
The show gvrp statistics User EXEC mode command displays GVRP statistics.
Syntax
•
show gvrp statistics
[
ethernet
interface
|
port-channel
port-channel-number
]
•
interface
— A valid Ethernet interface.
•
port-channel-number
— A valid trunk index.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
• There are no user guidelines for this command.
Console# show gvrp configuration
GVRP Feature is currently enabled on the switch.
Maximum VLANs: 255
Port(s) GVRP-
Status
Registration Dynamic
VLAN
Creation
Timers
(milliseconds)
Join
Leave Leave All
------- ------ ------------ -------- ------------- ----- -----
g1 Enabled Normal Enabled 200 600 10000
g4 Enabled Normal Enabled 200 600 10000
5400_CLI.book Page 192 Wednesday, December 17, 2008 4:33 PM