Command Groups 49
RADIUS Commands
RMON Commands
Command Group Description Access Mode
radius-server host Specifies a RADIUS server host. Global
Configuration
radius-server key Sets the authentication and encryption key for all RADIUS
communications between the router and the RADIUS
daemon.
Global
Configuration
radius-server retransmit Specifies the number of times the software searches the list
of RADIUS server hosts.
Global
Configuration
radius-server source-ip Specifies the source IP address used for communication
with RADIUS servers.
Global
Configuration
radius-server source-ipv6
Specifies the source IPv6 address used for the IPv6
communication with RADIUS servers.
Global
Configuration
radius-server timeout Sets the interval for which a router waits for a server host to
reply.
Global
Configuration
radius-server deadtime Improves RADIUS response times when servers are
unavailable.
Global
Configuration
show radius-servers Displays the RADIUS server settings. Privileged User
EXEC
Command Group Description Mode
show rmon statistics Displays RMON Ethernet Statistics. User EXEC
rmon collection history Enables a Remote Monitoring (RMON) MIB history
statistics group on an interface.
Interface
Configuration
(Ethernet, port-
channel)s
show rmon collection
history
Displays the requested history group configuration. User EXEC
show rmon history Displays RMON Ethernet Statistics history. User EXEC
rmon alarm Configures alarm conditions. Global
Configuration
show rmon alarm-table Displays the alarms summary table. User EXEC
show rmon alarm Displays alarm configurations. User EXEC
rmon event Configures a RMON event. Global
Configuration
5400_CLI.book Page 49 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
