Dell PowerConnect 5424 Command Line Interface Guide

314 RMON Commands
show rmon history
The show rmon history User EXEC mode command displays RMON Ethernet Statistics history.
Syntax
• show rmon history index { throughput | errors | other } [ period seconds ]
• index — The requested set of samples. (Range: 1 - 65535)
• throughput — Displays throughput counters.
• errors — Displays error counters.
• other — Displays drop and collision counters.
• period seconds — Specifies the requested period time to display. (Range: 1 - 4294967295)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
• There are no user guidelines for this command.
Examples
The following example displays RMON Ethernet Statistics history for "throughput" on index number 5.
Console# show rmon history 5 throughput
Sample Set: 1 Owner: CLI
Interface: g1 Interval: 1800
Requested samples: 50 Granted samples: 50
Maximum table size: 500
Time Octets Packets Broadcast Multicast %
------------------ --------- ------- ---------- --------- -----
Jan 18 2002 21:57:00 303595962 357568 3289 7287 19.98%
Jan 18 2002 21:57:30 287696304 275686 2789 2789 20.17%
5400_CLI.book Page 314 Wednesday, December 17, 2008 4:33 PM

Dell PowerConnect 5424 Specifications

General

Ports	24 x 10/100/1000Base-T
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
VLAN Support	Yes
Rack Mountable	Yes
Power Supply	Internal
MAC Address Table Size	8K entries
RAM	128 MB
Flash Memory	16 MB
Voltage Required	100-240V AC
Management	Web, CLI, SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% (non-condensing)
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Remote Management Protocol	SNMP, RMON, Telnet
Features	QoS, VLAN, Link Aggregation