Dell PowerConnect 5424 - 28 Spanning-Tree Commands; Spanning-Tree; Spanning-Tree Mode

Spanning-Tree Commands 347
Spanning-Tree Commands
spanning-tree
The spanning-tree Global Configuration mode command enables spanning-tree functionality.
Use the no form of this command to disable spanning-tree functionality.
Syntax
• spanning-tree
• no spanning-tree
Default Configuration
Spanning-tree is enabled.
Command Modes
Global Configuration mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example enables spanning-tree functionality.
spanning-tree mode
The spanning-tree mode Global Configuration mode command configures the spanning-tree
protocol. Use the no form of this command to return to the default configuration.
Console(config)# spanning-tree
5400_CLI.book Page 347 Wednesday, December 17, 2008 4:33 PM