Dell PowerConnect 5424 - Show Rmon Collection History

312 RMON Commands
Syntax
• rmon collection history index [ owner ownername ] [ buckets bucket-number ] [ interval seconds ]
• no rmon collection history index
• index — The requested statistics index group. (Range: 1 - 65535)
• owner ownername — Records the RMON statistics group owner name. If unspecified, the name is
an empty string.
• buckets bucket-number — A value associated with the number of buckets specified for the RMON
collection history group of statistics. If unspecified, defaults to 50. (Range:
1 - 50)
• interval seconds — The number of seconds in each polling cycle. If unspecified, defaults to 1800.
(Range: 1 - 3600)
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet, port-channel) mode.
User Guidelines
• This command cannot be executed on multiple ports using the interface range ethernet command.
Example
The following example enables a Remote Monitoring (RMON) MIB history statistics group on port g8
with the index number "1" and a polling interval period of 2400 seconds.
show rmon collection history
The show rmon collection history User EXEC mode command displays the requested history group
configuration.
Syntax
• show rmon collection history [ ethernet interface | port-channel port-channel-number ]
• interface — Valid Ethernet port.
• port-channel-number — Valid port-channel trunk index.
Default Configuration
This command has no default configuration.
Console (config)# interface ethernet g8
Console (config-if)# rmon collection history 1 interval 2400
5400_CLI.book Page 312 Wednesday, December 17, 2008 4:33 PM