EasyManuals Logo

Dell PowerConnect 5424 Command Line Interface Guide

Dell PowerConnect 5424
512 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
86 AAA Commands
User Guidelines
The default and optional list names created with the
aaa authentication login
command are used with
the
login authentication
command.
Create a list by entering the
aaa
authentication login
list-name method
command for a particular
protocol, where
list-name
is any character string used to name this list. The
method
argument identifies
the list of methods that the authentication algorithm tries, in the given sequence.
The additional methods of authentication are used only if the previous method returns an error, not if
it fails. To ensure that the authentication succeeds even if all methods return an error, specify
none
as
the final method in the command line.
Example
The following example configures authentication login.
aaa authentication enable
The aaa authentication enable Global Configuration mode command defines authentication method
lists for accessing higher privilege levels. Use the no form of this command to return to the default
configuration.
Syntax
aaa authentication enable
{
default
|
list-name
}
method1
[
method2
...]
no aaa authentication enable default
default
— Uses the listed authentication methods that follow this argument as the default list of
methods, when using higher privilege levels.
list-name
— Character string used to name the list of authentication methods activated, when
using access higher privilege levels.
method1
[
method2
...] — Specify at least one from the following table:
Console (config)# aaa authentication login default radius local
enable none
Keyword Source or destination
enable Uses the enable password for authentication.
line Uses the line password for authentication.
none Uses no authentication.
radius Uses the list of all RADIUS servers for authentication. Uses username
"$enabx$." where x is the privilege level.
tacacs Uses the list of all TACACS+ servers for authentication. Uses username
"$enabx$." where x is the privilege level.
5400_CLI.book Page 86 Wednesday, December 17, 2008 4:33 PM

Table of Contents

Other manuals for Dell PowerConnect 5424

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell PowerConnect 5424 and is the answer not in the manual?

Dell PowerConnect 5424 Specifications

General IconGeneral
Ports24 x 10/100/1000Base-T
Switching Capacity48 Gbps
Forwarding Rate35.7 Mpps
VLAN SupportYes
Rack MountableYes
Power SupplyInternal
MAC Address Table Size8K entries
RAM128 MB
Flash Memory16 MB
Voltage Required100-240V AC
ManagementWeb, CLI, SNMP
Operating Temperature0°C to 45°C
Storage Temperature-20°C to 70°C
Humidity10% to 90% (non-condensing)
Standards ComplianceIEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Remote Management ProtocolSNMP, RMON, Telnet
FeaturesQoS, VLAN, Link Aggregation

Related product manuals