Dell PowerConnect 5424 - Exit (Mst); Abort (Mst)

Spanning-Tree Commands 361
exit (mst)
The exit MST Configuration mode command exits the MST Configuration mode and applies all
configuration changes.
Syntax
•exit
Default Setting
This command has no default configuration.
Command Mode
MST Configuration mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example exits the MST Configuration mode and saves changes.
abort (mst)
The abort MST Configuration mode command exits the MST Configuration mode without applying the
configuration changes.
Syntax
• abort
Default Setting
This command has no default configuration.
Command Mode
MST Configuration mode.
User Guidelines
• There are no user guidelines for this command.
Console(config) # spanning-tree mst configuration
Console(config-mst) # exit
5400_CLI.book Page 361 Wednesday, December 17, 2008 4:33 PM