444 User Interface
Example
The following example changes the configuration mode from Interface Configuration mode to User
EXEC mode.
exit(EXEC)
The exit User EXEC mode command closes an active terminal session by logging off the device.
Syntax
•exit
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode .
User Guidelines
• There are no user guidelines for this command.
Example
The following example closes an active terminal session.
end
The end Global Configuration mode command ends the current configuration session and returns to the
privileged command mode.
Syntax
•end
Default Configuration
This command has no default configuration.
Console(config-if)# exit
Console(config)# exit
Console#
Console> exit
5400_CLI.book Page 444 Wednesday, December 17, 2008 4:33 PM