Dell PowerConnect 5424 - 35 User Interface; Enable; Disable

User Interface 441
User Interface
enable
The enable User EXEC mode command enters the privileged EXEC mode.
Syntax
• enable [ privilege-level ]
• privilege-level — Privilege level to enter the system. (Range: 1 - 15)
Default Configuration
The default privilege level is 15.
Command Mode
User EXEC mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example shows how to enter privileged mode:
disable
The disable Privileged EXEC mode command returns to User EXEC mode.
Syntax
• disable [ privilege-level ]
• privilege-level — Privilege level to enter the system. (Range: 1 - 15)
Console> enable
enter password:
Console#
5400_CLI.book Page 441 Wednesday, December 17, 2008 4:33 PM