EasyManua.ls Logo

Dell PowerConnect 5424 - Show Ip Dhcp Snooping Binding

Dell PowerConnect 5424
512 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DHCP Snooping 185
Default Configuration
This command has no default configuration.
Command Mode
EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the DHCP snooping configuration.
show ip dhcp snooping binding
The show ip dhcp snooping binding User EXEC mode command displays the DHCP snooping binding
database and configuration information for all interfaces on a switch.
Syntax
show ip dhcp snooping binding [mac-address
mac-address
] [ip-address
ip-address
] [vlan
vlan
]
[ethernet
interface
| port-channel
port-channel-number
]
mac-address
— Specify a MAC address.
ip-address
— Specify an IP address.
vlan-id
— Specify a VLAN number.
interface
— Specify Ethernet port.
port-channel-number
— Specify Port-channel number.
Default Configuration
This command has no default configuration.
Console # show ip dhcp snooping
DHCP snooping is enabled
DHCP snooping is configured on following VLANs: 2, 7-18
DHCP snooping database: enabled
Verification of hwaddr field is enabled
Interface Trusted
g1 Yes
g2 Yes
5400_CLI.book Page 185 Wednesday, December 17, 2008 4:33 PM

Table of Contents

Other manuals for Dell PowerConnect 5424

Related product manuals