System Management 417
User Guidelines
• There are no user guidelines for this command.
Example
The following example specifies the device asset tag as "1qwepot".
show system id
The show system id User EXEC mode command displays the ID information.
Syntax
• show system id
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
• The tag information is on a device by device basis.
Example
The following example displays the system service tag information.
Console (config)# asset-tag 1qwepot
Console> show system id
Serial number : 123456789
Service tag :
Asset tag :
5400_CLI.book Page 417 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
