394 Syslog Commands
management logging
The management logging Global Configuration mode command controls logging of management access
lists events. To disable logging use the no form of the command.
Syntax
• management logging deny
• no management logging deny
•deny —
Log messages related to management ACLs deny actions.
Default Configuration
Logging of management access lists events
enabled.
Command Mode
Global Configuration mode.
User Guidelines
• Other types of management ACLs events are not subject to this command.
Example
The following example enables logging messages related to deny actions of management ACLs.
show logging
The show logging Privileged EXEC mode command displays the state of logging and the syslog messages
stored in the internal buffer.
Syntax
• show logging
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
• There are no user guidelines for this command.
Console(config)# management logging deny
5400_CLI.book Page 394 Wednesday, December 17, 2008 4:33 PM